Everyone knows how disastrous water damage can be to your
house’s exterior. But it can do much more than simply damage the outside; it
can seep inside and harm your house’s foundation and structural stability. It’s
really hard to deal with all of the damage because it is rather costly! Just
look at any company offering Siding Damage Repair services in Renton WA and
you’ll see their expensive costs. Plus,
it’s not east finding a certified and suitable contractor that can fix the
issue in time. Hence that is why you always have to do some preventative
measures to avoid this kind of water damage.
You Need to Protect
Your Siding
Simple siding will not be enough to safeguard your home
against the excessive rainfall and flooding! It will still be prone to water
damage. That is why you need to take some extra steps that protect that siding
of your home. Essentially, it means you have utilize the methods of layering
sheeting and flashing. Additionally, you may also have to do some caulking and
house wrap! You have to completely seal the siding material if you are hoping
to protect the home from water damage. And it’s also good to remember that you
use vinyl siding as it is waterproof and can thus resist water.
Fill In the Gaps!
The siding can do a lot of the work but there are still some
holes and gapes from which water could enter your house and cause a lot of
harm. That is where the popular flashing methods come in. Flashing basically
refers to a thin strip of metal material that is put at intersections between
the exterior surfaces. This ultimately helps control the water flow. You will
see this located at the chimneys, roofs, doors and windows. It’s important
where the drainage plan suddenly alters its direction. You need to remember
that flashing has to be done properly; it has to be the appropriate size and
placed in the right locations. Contact professional Siding Contractors in
Bellevue WA if you are confused about it. Otherwise you would have to pay for
the Siding Water Damage Repair and it can cost a lot!
Know Where Caulking
is Needed
People usually go overboard with the caulking technique
because they think it will seal everything but in actuality it’s not
recommended by experts. You need to know exactly where the caulking is required.
The corners and edges are the most vital areas where caulking should be
applied. Moreover, any wooden window frame and trim boards also need it. All
the cracks and holes in the siding have to be caulked as well.
Where caulking is not needed are the areas of window weep
holes and the trim boards right above the siding. Plus, the bottom of siding is
where it is needed as well. Plus, it’s not a good idea to caulk the areas
around the metal flashing.
Comments
Post a Comment